Hammer Crusher

The hammer crusher (hammer mill) crushes by the collisions between high-speed hammer and material, and the hammer crusher (hammer mill) has the features of simple structure, high reduction ratio, high efficiency, etc. The PC hammer crusher (hammer mill)is developed for both dry and wet crushing of brittle, medium-hard materials for the mining, cement, coal, metallurgic material, construction material, road building, and petroleum & chemical industries.
1. The hammer crusher (hammer mill) are mainly used to crush mid-harness stones and mining ores primarily and secondarily in metallurgy, mining, chemical industry, cement, construction, fire-proof material and ceramics industries, etc.
2. The hammer crusher (hammer mill) is most suitable to crush all kinds of minerals and ores, whose largest compressive resistance should not be more than 320 MPa.

Hammer crusher Features:
Stones stricken by stones crushing cavity;
Hammer head is wearable;
Intensity of principal axis is higher;
Discharging granularity is fine and equality;
Easy maintenance;
Reliable operation.

Operating principle of Hammer Crusher:
The main working part of hammer crusher is rotors with hammer. The rotors consist of main shaft, disk, pin shaft and hammers. The motor drives the rotors to rotate quickly in the crushing cavity. Raw materials enter the crusher through the feed opening and are stricken, impacted, cut and ground by the high-speed hammer to small size. There is a screening plate under the rotor, so that materials with size smaller than the screen mesh will be screened out and others are left to be further hammered and ground until reach the standard size. The size of the final product can be adjusted by changing the screening plate. The gap between the rotors and the screening plate can also be adjusted according to different requirement.

Technical Data: Notice: Any change of Hammer Crusher technical data shall not be advised additionally.

Hammer Crusher PDF Download (587KB)