The use of vibrating screen

Author:Liming news centre Post Date:2009-8-06

The basic principles of the Department of shaker motor shaft through the lower end of the installation of a heavy hammer (Heng uneven weight), the motor rotation into a horizontal, vertical, tilt three
Million campaign, and then communicated to the campaign screen surface. If the change in weights up and down the Department of the phase angle of the road can change the direction of raw materials.
Vibration motor for use:
1, the vibration acceleration: no more than 7g (g: acceleration due to gravity)
2, the ambient temperature: not more than 40 ℃
3, Voltage: 380V

the installation and adjustment of vibrating screen
1, removed before the use of transport support, transportation support in the spring to a fixed between the upper and lower shaker, to prevent damage during transport.
2, vibrating screen should be placed on horizontal surface, level must be smooth and flat.
3, the called party, pay attention to the bottom of a heavy hammer vibration motor should rotate counter-clockwise. (Because of lack of functioning resulted in damage to the vibration motor is not responsible for the Company)
4, adjusted to run track materials, please refer to shaker

Use and maintenance
1, the machine should be installed in the electrical protection device.
2, the early operation of the machine, check the anchor bolts at least once a day to prevent loosening.
3, when the motor rotation direction does not meet the requirements, the adjustment to phase sequence power.
4, the machine is running a total of 1500 hours, they should check the bearings, if serious injury should be immediately replaced.